Architecture family
General information on the Frame Construction module
Create menu
Icon |
Function |
Use |
You can use this tool to create series of rafters. |
||
You can use this tool to create beams. |
||
You can use this tool to create headers at rafter-supporting purlins, beams, collar beams or collar ties. |
||
You can use this tool to create hip and valley rafters. |
||
You can use this tool to create roof beams. |
||
You can use this tool to create collar beams that are placed between rafters or between rafters and posts or between timber elements. |
||
You can use this tool to create collar ties that are placed between rafters or between rafters and posts. |
||
You can use this tool to create posts. |
||
You can use this tool to create steel or timber elements like struts, braces, inclined slabs, for example. |
||
You can use this tool to create rafter-supporting purlins and battens. |
||
|
|
|
You can use this tool to determine the height of an architectural component and place an elevation symbol with a label. |
||
You can use this tool to label all architectural elements, advanced elements, instances of smart symbols and objects created in the Object Manager module at a later stage. |
||
You can use this tool to give a unique component number to architectural elements. |
||
You can use this tool to analyze steel and timber elements. These reports can be sent to the printer and imported as PDF files to the document. |
Modify menu
Icon |
Function |
Use |
You can use this tool to display and modify the architecture-specific properties of any architectural element. You can also change different architectural elements in a single operation. |
||
You can use this tool to show or hide junction lines (for example, the lines where walls intersect). |
||
You can use this tool to update the labels for all the architectural elements in the loaded, active documents. In the case of large circular spaces (e.g., rooms based on a 2D circle), the area is calculated according to pi and labeled. |
||
You can use this tool to delete the component numbers assigned to architectural elements. |
||
You can use this tool to restore the three-dimensional view of architectural elements. |
||
You can use this tool to define selection criteria for finding objects and architectural elements in the active, loaded documents. The elements found are highlighted and can be further processed. |
||
You can use this tool to modify the parameters of steel and timber elements placed. |
||
You can use this tool to recalculate the 3D representation of steel and timber elements. |
||
You can use this tool to make steel and timber elements (e.g. rafters or beams) intersect existing architectural components (e.g. roof covering). |
||
You can use this tool to modify hip rafters and valley rafters so that their bottom side adjusts in a V-shaped manner to the roof pitch. |
(C) Allplan GmbH | Privacy policy |