Dimension line parameters

Several tools

Bar Reinforcement module

Place

Dimension Line, Label

FF Components

Enter Area Reinforcement

Auto-Dimension and Label (Reinforcement Tools)

Modify Bar Labels (Properties palette)

BAMTEC module

Basic Carpet Reinforcement

Additional Carpet Reinforcement

Carpet Span Reinforcement

Carpet Mounting Strips

Dimension Line, Label

You can change the parameter settings for the dimension line as you need.

Dimension text

Specifies whether dimension text is displayed for the dimension line. This is important if the dimension line is to include the position of the placement within the shell.

Number of spacing values

Specifies whether the bar spacing and its number are included in the dimension line. In addition, you can sum up the individual values by selecting the Total check box, specify the Separator between the bar spacing and the number and change the sequence of bar spacing and number by selecting the Spacing at start check box.

Dimension line text

Specifies whether the dimension line includes additional text. You can choose between the number of pieces or the number of pieces and spacing.
X offset defines the offset of the text in the direction of the dimension line in [mm]. The reference point is the bottom or left end of the dimension line.
Y offset defines the offset of the text perpendicular to the dimension line in [mm].

Bar markers

Specifies whether a symbol in the dimension line indicates the position of the bars. This symbol is displayed, regardless of whether you place the dimension line inside or outside the placement.
Select the Symbol type and specify the Symbol size in [mm].

Dimension line options

You can specify the general parameters of dimension lines in a separate dialog box.