Carpet mounting strips

Module(s): BAMTEC

You can use the Carpet Mounting Strips tool to place mounting strips within a placing polygon. Recesses can be taken into account.
Allplan automatically places mounting strips on the BA_B_MST layer. When creating layouts for checking purposes, you can disable this layer in the layout editor.

To place reinforcement mounting strips for the carpet

1. Click Carpet Mounting Strips (How).
   

   Activate Carpet Mounting Strips in one of the following ways

   • Menu bar: Create Engineering BAMTEC

   • Palette: Tools Create area in the following module(s):

   BAMTEC

   • Configuration: Engineering BAMTEC flyout
2. Enter the outline polygon or click Match in the input options to use an existing outline.
   

   1. Click the first point of the outline polygon in the workspace.
   2. Click the second point of the outline polygon in the workspace.
   3. Click additional points if required.
   4. Close the polygon.

   With every point you enter you can change the support depth manually.

3. If you are working in Reinforce with 3D model mode and you have not yet created any views, you must select the view so as to assign the basic spatial orientation and create a view.
   If views already exist, click one (the Old button is active in the input options) and continue working in it. However, you can also create a new view (the New button is active in the input options) and create a new reinforcement cage with this view.
4. Modify the outline polygon using the tools on the context toolbar and define the location of the placement in space so as to establish the relationship (offset) between the defined spatial plane and the placement (with Reinforce with 3D model only).
5. Click OK to confirm the settings.
6. Set the placement parameters for the carpet mounting strips.
7. Select the dimension line type in the list box at the top of the palette, specify the dimension line parameters for the Dimension line type or the text parameters and format properties of the mark number for the Mark symbols type, define the settings in the input options and place the dimension line or the mark number.
   Or
   Skip dimensioning by pressing ESC.
   

   When the dimension line type is set to Dimension line and you have selected several placements of a mark for a common label, you can create a continuous dimension line even if the placements are set off. All you need to do is select the Align option.
   You can use the Formwork edges option to add the position of the placement within the shell to the dimensions by clicking two points of the shell.

   When the dimension line type is set to Mark symbols, you can use Anchor point to attach a specific point of the mark number preview to the crosshairs. In addition, you can use and to alter the distance between the crosshairs and the anchor point.

   

   For polygonal placements, the index is automatically listed after the mark number. This way, all the bars are assigned correctly to the schema and reinforcement schedules.
   Whether numbers or characters are used for the index depends on the selected design code.

8. Select the Automatic mark number option in the input options if the program is to create the mark number at the beginning or end of the label depending on the drop-in point specified and define the Anchor point of the label, if necessary.
9. Specify the label parameters, place the label of the carpet mounting strips (you can define the text angle in advance) and create the leader manually, if necessary.
   Or
   Skip labeling by pressing ESC.
10. When you have configured Allplan to create a layer symbol ( Options, Reinforcement - Label page) and you have not yet placed this symbol along with the label, you can now select a Layer symbol in the Leader area of the palette and click the drop-in point or a bar segment.
    Or
    Skip layer marking by pressing ESC.