Frilo Plate module, overview

Introduction

You can use the FE program for plates, which is based on graphics. to calculate and design reinforced concrete floors and slabs with beams. You can define complex support conditions and loads.
For calculations without design, you can also use any homogeneous or anisotropic material.

The implemented network generator is based on the ”advancing front method". This way, you can quickly and easily generate meshes of two-dimensional areas of any shape. You can create triangular and four sided meshes as well as combinations of these two types.

The program uses matrices based on hybrid formulations to calculate elements. The major advantage of hybrid elements is that they are very precise in conjunction with thin plates. Consequently, shear forces are also calculated accurately.
For 'thick' plates the analysis can also be based on Kirchhoff-Mindlin.

For reinforcement, the method developed by Baumann is used. A cracked plate element serves as the model.

Note: You can define uniaxial statical structures for precast slabs, prestressed hollow core elements etc.

Icon	Function	Use
	Frilo Plate Export-Calculation-Import	You can use this tool to transfer architectural components to the FE program for plates provided by Nemetschek Frilo GmbH. The program starts automatically. Based on the architectural components, the system and supports are detected automatically. When you exit the program, the results are generated and imported to the drawing file specified.
	Export Frilo Plate Data	You can use this tool to save architectural components in an ASCII file. The geometric data of this file can then be imported as a basis for calculations into the FE program for plates provided by Nemetschek Frilo GmbH.
	Send Frilo Plate File to Email Recipient	You can use this tool to save architectural components in an ASCII file and send it by email. The geometric data of this file can then be imported as a basis for calculations into the FE program for plates provided by Nemetschek Frilo GmbH.
	Export Allplan File for Frilo Plate	You can use this tool to export architectural components and design entities as a DXF file. The data of this file can then be imported as a basis for your work into the FE program for plates provided by Nemetschek Frilo GmbH. This way, you can process subsequent changes to the structure in the FE program without losing existing data.
	Start Frilo Plate	You can use this tool to start the FE program for plates provided by Nemetschek Frilo GmbH. When you exit the program, the results are generated and imported to the drawing file specified.
	Reinforcement Contours	You can use this tool to display reinforcement contours in the current drawing file. This requires a fully completed FEA calculation whose results can be accessed here.