Module(s): Frilo Plate
You can use the Frilo Plate Export-Calculation-Import tool to transfer architectural components to the FE program for plates provided by Nemetschek Frilo GmbH. The program starts automatically. Based on the architectural components, the system and supports are detected automatically.
When you exit the program, the results are generated and imported to the drawing file specified.
To transfer architectural components to the FE program for plates and start the program
The FE program for plates starts automatically and creates the system and the supports based on the architectural components.
Note: The FE program for plates only starts when you have selected an architectural slab. Please bear in mind that you cannot transfer several slabs that do not intersect.
If architectural components are not available, use the Start Frilo Plate tool.
Note: If you save the calculation under a different name in the FE program for plates and still want to establish a link, you need to use the same name to save the document in Allplan.
This is only possible when you have quit the FE program by choosing the Save option, which saves the results with the name of the drawing file in the FE program for plates.
Note: If you want to save the results under a different name, export them before you quit the FE program so that you can import them into Allplan using the Import FEA Files tool.
(C) Allplan GmbH | Privacy policy |