You can switch between Top and Bottom to select results for the top or bottom reinforcement layer.

You can switch between Tension and Compr. to select results for the reinforcement mode.

You can switch between Composite I and Composite II to calculate the anchorage length.

You can use this to set the offset value to be used for calculating the anchorage length.

You can also configure the program to calculate this value automatically. Click the Auto button. The program calculates the value and displays it in the corresponding data entry box. The values of the selected FEA calculation are used as the basis for this calculation.
Deactivate Auto to change the value..

Use this to specify which additional boundary conditions the system is to take into account when it calculates the required reinforcement

This button is only available when the FEA document contains results for a half floor or when the document in question has been used as the basis for the calculation of punching shear reinforcement with the HALFEN-DEHA program.

Depending on the settings made for reinforcement layer, direction and content, the calculated reinforcement content is displayed. This includes information on the minimum and maximum reinforcement content.

You can specify whether the color shading increment value is to be set manually or calculated automatically by the program.

When the color shading option is set as Manual, you can enter a value here for the color increment.
When the option is set to Automatic, the value calculated by the program is displayed.

Activate this button after switching to a different document while the windows with the FEA graphics display are open.
The current reinforcement situation serves as the basis for the color update in the new document.