Filter Assistant + Filter Step by Step
Filter |
Use |
Match |
Matches all or specific properties of an element and uses this/these as the filter criteria. |
Pen |
Filters by elements with a specific pen. |
Line Type |
Filters by elements with a specific line type. |
Color |
Filters by elements with a specific color. You can choose from 256 colors. |
Layer |
Filters by layers. All layers in the active document and in the drawing files open in edit mode are available. |
Group number |
Filters by elements belonging to a group with a specific number. |
Construction line |
Filters by elements created in construction line format. |
Pattern line property |
Filters by elements with the pattern line property and a pattern with a specific number. |
Hatching number |
Filters by hatching styles with a specific number. |
Pattern number |
Filters by patterns with a specific number. |
Style area number |
Filters by style areas with a specific number. |
Point symbol number |
Filters by point symbols with a specific number. |
|
|
Element |
Filters by elements, e.g., lines, hatching, smart symbol. |
DTM |
Filters by elements created with the Digital Terrain Model module. |
Urban Planning, Landscaping |
Filters by elements created with the Urban Planning and Landscaping modules. |
Layout Element |
Filters by elements in layouts. You can also filter by scale and drop-in angle. |
|
|
Architecture |
Filters by architectural elements. You can define the type of architectural element, thickness and material. For more information, see Filtering by architectural component. |
Attribute |
Filters by elements with a specific attribute. |
Building alteration category |
Filters by architectural elements with the As-built, Demolition and New building attributes. |
Allfa |
Filters by Allfa elements. |
|
|
Reinforcing Bar Element, Mesh Element, |
Filters by elements of the type you select. |
|
|
Delete condition |
Filter Step by Step only: deletes the filter condition you defined last. |
|
|
Selection option for ambiguous elements on/off |
When there are congruent elements, this lets you select the one to be activated. When this option is not selected, the program always selects the element that was created first (that is, the older one). |
Reselect |
Reselects the elements that were selected last. |
Fence on/off |
Lets you enter a selection fence. Click the first point again to close the polyline. |
Fully bounded |
Selects the elements that are fully bounded by the selection window only. |
Fully bounded and intersected |
Selects the elements that are fully or intersected by the selection window. |
Intersected only |
Only selects elements that are intersected by the selection window. |
Select elements based on direction |
Selection depends on the direction in which you enter the selection window:
|
Brackets |
Activates the brackets tool. All the elements you select after ”opening” the brackets, whether selected in a rectangle, fence or individually, are added to the selection. Click the Bracket tool again to ”close brackets.” |
Filter Step by Step |
Applies a filter to elements you have already selected or filtered; you can specify additional filter criteria. For more information, see Filtering step by step. |
Most Recent Filters |
Retrieves filter settings you have already used. |
(C) Allplan GmbH | Privacy policy |