Automatic depth placement
Tool(s): Place Mesh Shape
To place existing mesh marks using automatic depth placement
- You have created a bending shape in a 3D general arrangement drawing. To do this, you used the Mesh Shape tool and selected the Reinforce with 3D model option.
- You have finished creating the bending shape by pressing ESC and placed the label, if necessary
or
Immediately after creating the bending shape, you selected the Label tool on the shortcut menu and labeled the bending shape
or
Immediately after creating the bending shape, you selected the Place Mesh Shape tool on the shortcut menu.
- Select Linear placement in the list box at the top in the Place Mesh Shape palette.
Click to open a dialog box, in which all placing modes are displayed graphically. - Select the Place automatically option in the input options.
The bending shape is placed using automatic depth placement.
Note: When you have created the bending shape in a 3D solid, Allplan only offers to place it automatically if there is an associative view of the 3D solid from which the placing depth can be derived.
- If you want to define a new placing region, click the button beside Placing line in the palette and the first and second point of the placing line.
- Define the parameters of the placing region, the reinforcement parameters and the .
Most parameters are also displayed in the graphics area, where you can define them by clicking. The parameter area updates immediately to reflect your entries. - In the input options, select the type of display to be assigned to the placement.
- Click Mirror bending shape to mirror the bending shape in the placing view. The mirror axis is parallel to the placing line (only possible if you have defined a new placing region).
- Click Different mark numbers to assign different mark number to meshes of different length.
- Click Same mark numbers to assign the mark number of the selected mesh shape to all the meshes in the placement, regardless of their length. This way, you can produce whole meshes that are then cut directly on site.
Please note that modifying the placement may change the mesh length. - Click / Toggle mesh diagonal to change the direction of the mesh diagonal (only possible if you have defined a new placing region).