Enter path as a line + Enter path as an area + Enter path as a spline + Modify Landscaping Elements
No
You can define several layers of pavement. The numbers of the individual layers of the path are displayed. Each layer is defined in a separate line.
Material/qualities
This is where you can enter the material of the individual layers of the pavement. The catalog set in the Assign Catalog area is used.
Note: For the label, the material or code text of the layer number 1 is used. The schedules include all materials.
Thickness
This is where you can enter the thickness of the individual layers of the pavement.
Factor
Enter a factor by which the material is multiplied.
Unit
This is where you can define the unit of measurement.
Trade
Enter the trade of the path.
You can enter up to 5 lines of custom text here.
Height, Height setup
Click Height to define the height of the path.
Catalog assignment
The catalog set here is available for selecting materials.
Pattern line (for linear paths only)
When you enable this check box, you can select a pattern. The path is then displayed as a pattern line.
Path width (for spline-shaped and element-oriented paths)
Enter the width of the path.
Border (for surface and spline-shaped paths)
You can enter a depth of the border to be applied to the hatching, pattern or fill.
Surface elements (for surface and spline-shaped paths)
You can specify whether a surface element is to be applied to the path and select the relevant surface element. Hatching styles and patterns can be combined with fills.
You can assign custom surfaces to paths. You can also modify surfaces you have already assigned. These surfaces appear in viewports with the Animation view type (and in the Animation module).
(C) Allplan GmbH | Privacy policy |