Support reinforcement

Module(s): Mesh Reinforcement

You can use the Support Reinforcement tool to place several meshes along a support line while taking the support reinforcement length into account. As the meshes are associated with the placing polygon, any changes you make to the geometric outline of the polygon or to the settings are reflected in the corresponding meshes.

To place meshes along a support line

1. Click Support Reinforcement (How).
   

   Activate Support Reinforcement in one of the following ways

   • Menu bar: Create Engineering Mesh Reinforcement

   • Palette: Tools Create area in the following module(s):

   Mesh Reinforcement

   • Configuration: Engineering Mesh Entry and Placement flyout
2. If you are working in Reinforce with 3D model mode and you have not yet created any views, you must select the view so as to assign the basic spatial orientation and create a view.
   If views already exist, click one (the Old button is active in the input options) and continue working in it. However, you can also create a new view (the New button is active in the input options) and create a new reinforcement cage with this view.
3. Enter the support area or click Match in the input options to use an existing support area.
4. Modify the support area using the tools provided on the context toolbar and define the location of the placement in space so as to establish the relationship (offset) between the defined spatial plane and the placement (with Reinforce with 3D model only).
5. Click OK to confirm the settings.
6. Select the mesh type to be placed:
   • Click Mesh type to select a defined mesh type in the list or
   • Enter the mesh identifier manually or
   • Click Match to match the settings of a reinforcing steel mesh you have already placed.
7. Enter the parameters on the Support Reinforcement Context toolbar.
8. Click OK to confirm the dialog box. The individual meshes of the support reinforcement are placed.