Folder, file name

Contents

Special features

Floor covering work.rdlc

All elements with the Floor covering work trade, including room name, room function, thickness, area and baseboard for each material and room; total for each material, calculation mode and final total.

Floor covering and baseboard are listed.
Can be entered using Baseboard

Screeding work.rdlc

All elements with the Screeding work trade, including room name, room function, thickness, area and baseboard for each material and room; total for each material, calculation mode and final total.

Tiling work.rdlc

All elements with the Tiling work trade, including room name, room function, thickness, area and baseboard for each material and room; total for each material, calculation mode and final total.

Baseboard of any kind is listed.
Can be entered using Baseboard

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material and object as well as show the graphics.

You can zoom in on and select report elements in the workspace.

Painting work.rdlc

All elements with the Painting work trade, including room name, room function, area and reveal for each material and room; total for each material, calculation mode and final total.

Openings (windows, niches) are taken into account in accordance with the regulations.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by object and show the graphics.

You can zoom in on and select report elements in the workspace.

Trades, overview.rdlc

All trades including component ID, object name, trade, material and quantity in accordance with the defined calculation mode for each component.

This calculation is in compliance with VOB (German Contract Procedure in the Building Industry).

In the Report Viewer, Parameters palette, User Interaction area, you can filter by trade, material and object.

Exterior insulation finish system.rdlc

All elements with the Exterior insulation finish system trade, including thickness and area for each material; total for each material, calculation mode and final total.

Openings are taken into account in accordance with the regulations.

Concreting work folder

Concreting work - in-situ concrete.rdlc

All elements with the Concreting work trade, by story, material and component, including graphics, dimensions and volume; total for each material, component type and story; final total for each story.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material.

You can zoom in on and select report elements in the workspace.

Concreting work.rdlc

All elements with the Concreting work trade, final total for each material and calculation mode.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material and story as well as show the graphics and component numbers.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Edge formwork - slabs.rdlc

Edge formwork of all slabs with the Concreting work trade, by story, including graphics, thickness, perimeter, numbering, formwork area, component number and dimensions; total for each material and story.

You can show the graphics in the Report Viewer, Parameters palette, User interaction area.

Based on the graphics, you can zoom in on and select report elements in the workspace.

Edge formwork - foundations.rdlc

Edge formwork of all foundations with the Concreting work trade, including graphics, thickness, perimeter, numbering, component number, dimensions and formwork area; total for each foundation type and final total.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by foundation type as well as show the graphics and component numbers.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Formwork - slabs (soffit).rdlc

Formwork of all slabs with the Concreting work trade, by story, including graphics, thickness, numbering, formwork areas, component number and dimensions; total for each material and story.

You can show the graphics and component numbers in the Report Viewer, Parameters palette, User interaction area.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Formwork - openings (slabs).rdlc

Edge formwork of openings in slabs with the concreting work trade, by story, including graphics, thickness, numbering, formwork area, component number and dimensions; total for each thickness and story.

You can show the graphics and component numbers in the Report Viewer, Parameters palette, User interaction area.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Formwork - openings (walls).rdlc

Edge formwork of openings in walls with the Concreting work trade, by story, including graphics, wall thickness, numbering, formwork area, component number and dimensions; total for each thickness and story.

In the Report Viewer, Parameters palette, User Interaction area, you can show the graphics and component numbers, filter by window opening and door opening and specify a Height difference of 0.5m or 1m.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Formwork - downstand beams.rdlc

Formwork of all downstand beams with the Concreting work trade, by story and component, including graphics, thickness, height, numbering, component number, dimensions and formwork area; total for each component, thickness and story.

You can show the graphics and component numbers in the Report Viewer, Parameters palette, User interaction area.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Formwork - walls, columns, flush piers.rdlc

Formwork of all walls, columns and flush piers with the Concreting work trade, by story and component, including graphics, wall thickness, height, numbering, component number, dimensions and formwork area; total for each component, thickness and story and final total.

In the Report Viewer, Parameters palette, User Interaction area, you can show the graphics and component numbers and specify a Height difference of 0.5m or 1m.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Masonry work folder

Masonry work.rdlc

Walls with the masonry work trade, by accounting unit, material and component, with/without graphics, short text/component number, dimensions and volume; total for each material, component type and story; final total for each story.

Openings are taken into account in accordance with the regulations.

In the Report Viewer, Parameters palette, User Interactionarea, you can filter by material and story as well as show the graphics and component numbers.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Openings.rdlc

Openings in walls with the masonry work trade, by opening type and wall material, including dimensions, number of pieces; total for each wall material and opening type.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by opening type (component) and story as well as show the component numbers.

Based on the component number, you can zoom in on and select report elements in the workspace.

Plaster and stucco work folder

Plaster and stucco work (details).rdlc

All elements with the Plaster and stucco work trade, by story and material, including room name, room function, calculation, dimensions and quantity; total for each material, story and final total.

Openings are taken into account in accordance with the regulations.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by object and show the graphics.

You can zoom in on and select report elements in the workspace.

Plaster and stucco work.rdlc

All elements with the Plaster and stucco work trade, by story and material, including room number, room name, thickness, area and reveal; total for each material, story and final total.

Openings are taken into account in accordance with the regulations.

Dry construction work folder

Assembly walls.rdlc

All walls by story and name, including graphics, number of pieces and area (without subtractions, including subtractions and according to VOB (German building regulations)); total for each name and story and final total.

Heights and lengths refer to the first wal layer.

You can show the graphics in the Report Viewer, Parameters palette, User interaction area.

Dry construction work (finishing surfaces).rdlc

All finishing surfaces with the Dry construction work trade, by story, area type and room, including material, room number, room name, calculation and quantity; total for each material, story and final total.

Openings are taken into account in accordance with the regulations.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material and object as well as show the graphics.

You can zoom in on and select report elements in the workspace.

Dry construction work (assembly walls).rdlc

All walls with the Dry construction work trade, by story and material, including short text/component number, dimensions and area; total for each material, story and final total.

Openings are taken into account in accordance with the German regulations for contracts and execution of construction works.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material and show the graphics and component number.

Based on the graphics or component number, you can zoom in on and select report elements in the workspace.

Dry construction work.rdlc

All elements with the Dry construction work trade, by story and unit, including material and room name, dimensions and quantity; total for each unit, material and final total.

Openings are taken into account in accordance with the regulations.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material as well as show and hide the matrix.