Reinforcement folder

Tool

Requirements

Reinforcement elements created with or without the 3D model, for example:
- Bar reinforcement created and placed with Bar Shape and Place Bar Shape.
- Bar reinforcement created and placed with Enter Area Reinforcement.
- Mesh reinforcement created and placed with Mesh Shape and Place Mesh Shape.
- Planar mesh reinforcement created and placed with Place Individually, Span Reinforcement and so on.
The reinforcement elements can be in the active document or in drawing files open in edit mode.

Folder, file name	Contents	Special features
Mesh cutting diagram - Switzerland.rdlc	The dimensions of all the selected mesh marks are displayed graphically for all components. The weight is output in accordance with the settings in the options. The same applies to the manner in which the mesh cutting diagram is displayed and labeled.	Specially designed for Switzerland. Additional information on cages, for example, can be added. The list ID of the current drawing file is used as the list number. You can define this ID as a property.
Mesh cutting diagram.rdlc	The dimensions of all the selected mesh marks are displayed graphically for all components. The weight is output in accordance with the settings in the options. The same applies to the manner in which the mesh cutting diagram is displayed and labeled.	The list ID of the current drawing file is used as the list number. You can define this ID as a property.
Mesh reinforcement.rdlc	All selected mesh marks with their mark-related parameters and dimensioned bending shapes.	Click the dimensioned bending shapes in editing mode ( not selected) to modify them in the workspace. If the modification is within the box displayed, the graphics are not resized. Bending shapes are not displayed for meshes that are not defined in the cross-section catalogs. The number of copies is saved in the loaded drawing files.
Quantities - Austrian standard.rdlc	All selected reinforcing bar marks with the total length and weight per diameter. In addition, the weight per diameter group and the total weight are included. If there are several steel grades, a separate list is created for each steel grade.	The list contains the diameters that are commonly used in Austria. Diameters that are not defined in the cross-section catalogs are listed but not analyzed. Additional diameters defined in the cross-section catalogs are only included in the total.
Couplers, nuts, threads.rdlc	The quantities of elements of all existing coupling systems are analyzed separately by diameter and type. In addition, the mark number of the bar and the name of the element are included. Each coupling system is listed separately.	You can specify the scope of the report by selecting the objects that are to be included.
Reinforcement schedule - names.rdlc	All selected reinforcing bar marks with abbreviated names, which provide information on the diameter, steel grade, length, number and weight per piece.	The total length and total weight are not listed. This schedule is commonly used in Russia.
Reinforcement schedule - bending shapes - summary.rdlc	Combines the individual Reinforcement - summary and Reinforcement schedule - bending shapes reports into a single report.
Reinforcement schedule - bending shapes.rdlc	All selected reinforcing bar marks with their mark-related parameters and dimensioned bending shapes. You can choose to show the graphics and steel grade. When the steel grade is displayed, a separate analysis by steel grade is included. A separate list is created for bending shapes placed polygonally. They are listed in a table (as with schemas).	You can specify the scope of the report by selecting the steel grade to be analyzed. Click the dimensioned bending shapes in editing mode ( not selected) to modify them in the workspace. If the modification is within the box displayed, the graphics are not resized. Marks whose diameters are not defined in the cross-section catalogs are listed but not analyzed. The number of copies is saved in the loaded drawing files.
Reinforcement schedule - British Standard.rdlc	All bending shapes of the selected reinforcing bar and mesh marks in accordance with shape codes. This schedule is based on the ISO 4066 schedule. A schema is displayed for the general bending shape 99.	Specially designed for England in compliance with BS 8666. The number of copies is saved in the loaded drawing files.
Reinforcement schedule - Holland Form.rdlc	All selected reinforcing bar marks according to codes. This schedule is similar to the ISO 4066 schedule. A new page is created for each steel grade.	Specially designed for the Netherlands. The number of copies is saved in the loaded drawing files.
Reinforcement schedule - ISO 4066.rdlc	All selected reinforcing bar marks in accordance with shape codes as specified in DIN ISO 4066. Mesh marks are not analyzed. You can choose to show or hide graphics.
Reinforcement schedule - Switzerland.rdlc	All selected reinforcing bar marks with the total length and weight per bar diameter. Bars of fixed length and of stock length as well as bars you have edited are listed separately. In addition, the report contains a table for special cages, stirrups and finished reinforcement products. If there are several steel grades, a separate list is created for each steel grade. In addition, all selected reinforcing bar marks are listed with their mark-related parameters and dimensioned bending shapes and a separate list is created for bending shapes placed polygonally. They are listed in a table (as with schemas). If you want, you can create an additional list with bending rules.	You can specify the scope of the report by selecting the steel grade to be analyzed. The list ID of the current drawing file is used as the list number. You can define this ID as a property. Click the dimensioned bending shapes in editing mode ( not selected) to modify them in the workspace. If the modification is within the box displayed, the graphics are not resized. Diameters that are not defined in the cross-section catalogs are listed but not analyzed.
Reinforcement schedule - summary.rdlc	All selected reinforcing bar marks with the total length and weight per bar diameter. Straight and bent bars are listed separately. If there are several steel grades, a separate list is created for each steel grade.	The number of copies is saved in the loaded drawing files.
Reinforcement - overview.rdlc	All selected reinforcing bar marks with the weight sorted by diameter group and the total weight. Bars of fixed length and bars you have edited are listed separately. In addition, the total weight for all selected mesh marks.	The weight is analyzed separately by component, which is defined by the superordinate structural level, and/or by list ID, which can be specified as a property of the drawing file. The number of copies saved in the loaded drawing files is taken into account.
Cross-section catalogs folder