Folder, file name

Contents

Special features

Finishing surfaces folder

Finish floors.rdlc

Finish floors (created using Room) and special floors (created using Floor) according to material, including graphics, room name, trade, dimensions, thickness and area; total area for each material and final total.

All openings are taken into account.

In the Report Viewer in editing mode, you can sort the Room name column alphabetically in ascending or descending order.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material as well as show and hide the matrix.

You can zoom in on and select report elements in the workspace.

Finish ceilings.rdlc

Finish ceilings (created using Room) and special ceilings (created using Ceiling) according to material, including graphics, room name, trade, dimensions, thickness and area; total area for each material and final total.

All openings are taken into account.

In the Report Viewer in editing mode, you can sort the Room name column alphabetically in ascending or descending order.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material as well as show and hide the matrix.

You can zoom in on and select report elements in the workspace.

Finish vertical surfaces.rdlc

Finish vertical surfaces (created using Room), special vertical surfaces (created using Vertical Surface) and vertical surface covering (created using Story) according to material, including graphics, room name, trade, dimensions, thickness, area and reveal; total area and reveal area for each material and final total.

All openings are taken into account.

In the Report Viewer in editing mode, you can sort the Room name column alphabetically in ascending or descending order.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material as well as show and hide the matrix.

You can zoom in on and select report elements in the workspace.

Finishing surfaces, material.rdlc

Finish specifications (created using Room), special surfaces (created using Vertical Surface, Floor or Ceiling) and vertical surface covering (created using Story) according to material, including graphics, room name, trade, area type, dimensions, thickness and area; total area for each material and area type and final total of all areas.

All openings are taken into account.

In the Report Viewer in editing mode, you can sort the Room column alphabetically in ascending or descending order.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material as well as show and hide the matrix.

You can zoom in on and select report elements in the workspace.

Finishing surfaces, overview.rdlc

Finish specifications (created using Room), special surfaces (created using Vertical Surface, Floor or Ceiling) and vertical surface covering (created using Story) according to area type, including room name, room function, material, layer number, thickness and net quantities.

All openings are taken into account.

In the Report Viewer in editing mode, you can sort the Room name column alphabetically in ascending or descending order.

In the Report Viewer, Parameters palette, User Interaction area, you can filter by material as well as show and hide the matrix.

Windows, doors folder

Skylights.rdlc

Window elements (smart symbols, SmartParts) in skylights for each story, including story name, graphics, name, number of pieces, width, maximum height, area and overall area.
Total for each story and final total of window area.

Smart symbols for skylights must be created using Smart Window and Door Symbols.

SmartParts are created with Domed Roof-Light SmartPart.

Windows (details with prices).rdlc

Window elements (smart symbols, SmartParts) for each story, including story name, graphics, item number, position, name, material, number of pieces, casement details, wall thickness, width, maximum height, price and total price.
Total prices for each story and final total.

Casement details are only available if the smart symbols were created with Smart Window and Door Symbols or the SmartParts were created with Window SmartPart.

For price, the Price attribute is analyzed.

You can hide the Graphics and control the Position from room using the Report Viewer, Parameters palette, User Interaction area:

If the Position from room option is selected, the Place of installation column shows the name and function of the room to which the windows belong.
If the Position from room option is not selected, the Place of installation and Room group attributes of smart window symbols are displayed.

Windows (details).rdlc

Window elements (smart symbols, SmartParts) for each story, including story name, graphics, item number, position, name, material, number of pieces, casement details, wall thickness, width, maximum height, area and overall area.
Total for each story and final total of window area.

Casement details are only available if the smart symbols were created with Smart Window and Door Symbols or the SmartParts were created with Window SmartPart.

You can hide the Graphics and control the Position from room using the Report Viewer, Parameters palette, User Interaction area:

If the Position from room option is selected, the Place of installation column shows the name and function of the room to which the windows belong.
If the Position from room option is not selected, the Place of installation and Room group attributes of smart window symbols are displayed.

Window offset.rdlc

Window elements (smart symbols, SmartParts), including graphics, story, number of pieces, width, height, area, unfinished opening (width, height) and total window area and total number of pieces.

Window elements must be created with Smart Window and Door Symbols or Window SmartPart.

The program will analyze the joint only if you create the window with the Window SmartPart tool and define the Offset to opening on the Settings tab.

Windows.rdlc

Window elements (smart symbols, SmartParts) for each story, including story name, graphics, name, number of pieces, width, maximum height, area and overall area.
Total for each story and final total of window area.

Window elements must be created with Smart Window and Door Symbols or Window SmartPart.

Window sills.rdlc

Smart window sill symbols and window sill SmartParts for each position (inside/outside); including material, number of pieces, thickness, length and total length. Total for each position (inside/outside) per story and material

Window sills must be created with Smart Window Sill Symbol or Window SmartPart - Window Sill.

You can show the component numbers in the Report Viewer, Parameters palette, User Interaction area.

Based on the component number, you can zoom in on and select report elements in the workspace.

Window openings.rdlc

Window openings and French window openings (created using Window) for each story, including object name, smart symbol name, material, number of pieces, maximum width, height and area.
Total for each story and final total of window area.

Area calculations are based on the maximum dimensions of the window opening and not on those of the smart window symbol.

In the Report Viewer in editing mode, you can sort the Object column alphabetically in ascending or descending order.

Domed roof-lights.rdlc

Domed roof-lights for each story, including graphics, name, number of pieces, curb height, dome height and unfinished opening (width, length); total for each story and final total.

Domed roof-lights must be created with Domed Roof-Light SmartPart.

Roller shutters.rdlc

SmartParts for roller shutters, sliding shutters and folding shutters for each story, including component ID and dimensions of the window opening (depth, height, length); total of window opening lengths for each story and final total.

Roller shutters, sliding shutters and folding shutters must be created with Shading SmartPart.

Shading.rdlc

Shading elements including the name of each element (roller shutters, sliding shutters and folding shutters) and number per story, wall thickness, dimensions of the window opening (height, width), window opening (in m²); total of shading elements and the associated window openings (in m²) for each story; final total of shading elements and the associated window openings (in m²) across all stories.

Shading elements (roller shutters, sliding shutters, folding shutters) must be created with Shading SmartPart.

Doors (details with prices).rdlc

Door elements (smart symbols, SmartParts) and sectional doors for each story, including story name, graphics, item number, position, name, material, number of pieces, door swing, wall thickness, width, maximum height, price and total price.
Total prices for each story and final total.

For price, the Price attribute of smart door symbols is analyzed.

You can hide the Graphics and control the Position from room using the Report Viewer, Parameters palette, User Interaction area:

If the Position from room option is selected, the Place of installation column shows the name and function of the room to which the doors belong.
If the Position from room option is not selected, the Place of installation and Room group attributes of smart door symbols are displayed.

Doors (details).rdlc

Door elements (smart symbols, SmartParts) and sectional doors for each story, including story name, graphics, item number, name, material, number of pieces, door swing, wall thickness, width, maximum height, area and overall area.
Total for each story and final total of door area.

You can hide the Graphics and control the Position from room using the Report Viewer, Parameters palette, User Interaction area:

If the Position from room option is selected, the Place of installation column shows the name and function of the room to which the doors belong.
If the Position from room option is not selected, the Place of installation and Room group attributes of smart door symbols are displayed.

Doors (for transfer of all attributes).rdlc

Door elements (smart symbols, SmartParts) and sectional doors with all attributes that can be assigned to door elements; for transfer to Excel.

Transfer to Excel using Export Allplan BCM and Quantities Data

Doors (for complete transfer).rdlc

Door elements (smart symbols, SmartParts) and sectional doors with all attributes; for transfer to Excel.

Transfer to Excel using Export Allplan BCM and Quantities Data

Doors (for brief transfer).rdlc

Door elements (smart symbols, SmartParts) and sectional doors with main attributes; for transfer to Excel.

Transfer to Excel using Export Allplan BCM and Quantities Data

Doors (with qualities).rdlc

Door elements (smart symbols, SmartParts) and sectional doors with position, qualities and attributes.

Report in table form in landscape format

Doors.rdlc

Door elements (smart symbols, SmartParts) and sectional doors for each story, including story name, graphics, name, number of pieces, width, maximum height, area and overall area.
Total for each story and final total of door area.

Door elements must be created with Smart Window and Door Symbols or Door SmartPart.

Door openings.rdlc

Door openings (created using Door) for each story, including smart symbol name, material, room assignment, number of pieces, maximum width, maximum height and area.
Total area for each story and final total.

Area calculations are based on the maximum dimensions.