Column, Based on Symbol with Freeform Outline

Tool(s): Column

• Draw the outline of the column in the Draft module and save the design as a symbol.

Note: The column outline must form a closed 2D outline; it can consist of circles, splines and clothoids.

To create a column based on a symbol with a freeform outline

1. Click Column (How).
   

   Activate Column in one of the following ways

   • Menu bar: Create Architecture Basic: Walls, Openings, Components

   • Palette: Tools Create area in the following module(s):

   Basic: Walls, Openings, Components

   • Configuration: Architecture Architectural Components flyout
2. If you want, you can now modify the column's parameters.
   Use one of the following options provided on the Context toolbar.
   

   • Click Properties to set the parameters in a dialog box.
   • Click Match Properties to copy the settings form an existing element.
   • Click Load favorite to select saved parameter combinations.
3. To set the column type, select the following settings in Properties:
   • Click Column Based on Symbol with Freeform Outline.
   • Click and select the symbol that is to serve as the column outline.
   • Enter the angle.
   • Set the other properties and the height.
4. Click OK to confirm your entries.
5. Set the column's anchor point on the Column Context toolbar.
   

   In the icon, click to place the transport point.

   The following options are available:

   

   

   

   With openings (for instance doors and windows) only the following options are available:

   

   Tip: You can rotate columns from symbol catalogs before you place them by using shortcuts or clicking in the dialog line and entering a cursor snap angle at the keyboard.

   

   To rotate components using the option provided in the dialog line, do the following:

   • Use the TAB key to activate .
   • Before you place components, you can
     • Press the ‘+’ key to turn the element by the angle specified in a counter-clockwise direction.
     • Press the ‘-’ key (minus) to turn the element by the angle specified in a clockwise direction.

   You can also use shortcuts to rotate components based on a cursor snap angle.

   The following shortcuts are available for rotating elements:

   • Press CTRL+^ to turn the element by the angle specified in a counter-clockwise direction.
   • Press CTRL+< to turn the element by the angle specified in a clockwise direction.
   

   The following shortcuts are available for rotating elements:

   • Press CTRL+^ to turn the element by the angle specified in a counter-clockwise direction.
   • Press CTRL+< to turn the element by the angle specified in a clockwise direction.

   You can also rotate components in the dialog line by entering a cursor snap angle at the keyboard.

   To rotate components using the option provided in the dialog line, do the following:

   • Use the TAB key to activate .
   • Before you place components, you can
     • Press the ‘+’ key to turn the element by the angle specified in a counter-clockwise direction.
     • Press the ‘-’ key (minus) to turn the element by the angle specified in a clockwise direction.
6. To position the foundation, click in the workspace and define the drop-in point.
   

   • Click the point.
   • Align to points using the linear snap function and click the point.
   • Define the point by making entries in the dialog line.

   Tip: To find out how to enter points in Allplan, see Precision Drawing.

   Tip: The shortcut menu and dialog line provide tools and options to assist you in the process of entering points. For more information, see Tools and Options.