Position of anchor point in component

Tool(s): Export routes

In addition to defining the drop-in point in Allplan, you can define an anchor point within the component. Using this point, you can exactly position the 3D route model in Allplan.

You can define the position of the anchor point in the cross-section by selecting an anchor point and specifying the dx, dy and dz offsets to this anchor point. Possible positions for the reference point:

• The origin of the global coordinate system (GCS) defines the reference point.
• The reference point is the origin of the local coordinate system (LCS), which is defined by the offset specified.
  If you do not use an offset, CCS and LCS are the same.
• Any station point serves as the reference point. Consequently, this reference point is identical to the reference point of the associated cross-section.

When placing the component, the program takes into account the offset you have defined in Allplan using (provided you have selected the Consider Allplan offset when exporting routes option). You can enter this offset in the project properties.
With the Delta point and Polar coordinates settings, the program does not take the offset into account even though you have selected the Consider Allplan offset when exporting routes option. Instead, the program always places the component at the current position of the cursor.

Note: When exporting routes, the program does not take into account the offset defined in the bridge and civil engineering tool. In other words, it always exports the original route of the global coordinate system.