On the Context toolbar, you can set the slope type and the slope for the cut and fill.
Slope type
Specify how the slope is entered:
Type |
Area |
Where |
|||
1:x |
0 |
1000 |
Engineer |
||
Angle |
90 |
0.0001 |
Architect |
||
% |
-- |
0.01 |
Foundation |
A vertical slope is obtained when slope type 1:x is set to 0, or when Angle is 90; this is not possible with %.
Slope for cut
Set the slope for the cut.
Slope for fill
Set the slope for the fill.
(C) Allplan GmbH | Privacy policy |