Available fixtures
Tool(s): Place PHILIPP Fixture
Three different catalogs with the following fixtures are available. Use the list box in the tree view to select a catalog.
Philipp transport anchors, galvanized
This catalog includes galvanized transport anchors for lifting, moving and installing precast concrete elements.
- Threaded anchor types
- Threaded transport anchors, straight, long, corrugated and short, corrugated
- Compact anchors
- Special sleeve and double sleeve
- Advantages of screw anchors
- and flat steel anchors:
Components do not project out from the component surface and the notches required for the threaded sleeves are small. The special knuckle threads are reliable and have a high resistance to wear and tear. They are used in conjunction with economic lifting devices. The threaded sleeves can be closed easily to prevent water and other substances from penetrating. However, the load capacity is limited due to the small dimensions of threads and sleeves. Special lifting devices are required for shear stress.
- The PHILIPP KK transport anchors of the spherical head system also have the advantage that there are no elements that project out from the component. Installation is easy due to the rotation-symmetric transport anchor and coupling on and off can be handled quickly using reliable and long-lasting lifting devices. However, please note that the PHILIPP KK transport anchors produce relatively large notches in the surface of the component which can be a disadvantage depending on the situation. Due to these characteristics, the load capacity of this system is limited. Compared with a threaded system, the component usually requires a higher degree of reinforcement.
- The PHILIPP cast-in lifting hoops are built directly into the precast element. The hoops are crimped and consist of blank (PHILIPP cast-in lifting hoops, blank) or galvanized (PHILIPP cast-in lifting hoops, galvanized) steel. A special lifting device is not required as the load hook can be connected directly with the loop. Consequently you do not run the risk of not having the appropriate lifting devices at hand. Depending on the component geometry, these hoops can transfer very high loads. Therefore, they are the perfect solution for extreme heavy and massive components. They are not suitable for thin slab panels as the load capacity that can be achieved is not very high. However, the disadvantage of cast-in lifting hoops is that they penetrate the formwork during the production of the precast elements. The also project out from the component surface. Therefore, it may be necessary to remove or cut them after assembly.
Philipp transport anchors, stainless steel
This catalog includes the stainless steel anchors.
- Threaded transport anchors, straight, long, corrugated and short, corrugated
- Compact anchors
- Special sleeves
Philipp connecting devices
This catalog contains the PHILIPP sandwich anchor system with
- Sleeve anchors
- Flat anchors
- Connecting pins
- Connecting stirrups
- clip-on pins
and the fixtures of the PHILIPP Power Duo system.