Align

Move

Rotate

Example:

Example:

Example:

• Bending shape and position of a stirrup are defined in the left column cross-section.
• The placing line is defined on the column on the right.

• Bending shape and position of a stirrup are defined in the left column cross-section.
• The placing line is defined on the column on the right.

• Bending shape and position of a stirrup are defined in the left column cross-section.
• The placing line is defined on the column on the right.

Settings in the dialog box

Settings in the palette

The stirrups are automatically aligned to the definition stirrup, that is, placed in the column on the left.

Settings in the dialog box

Settings in the palette

The stirrups are automatically moved to the placing line (i.e. the column on the right) and placed there.

Settings in the dialog box

Settings in the palette

The stirrups are automatically moved to the placing line (i.e. the column on the right) and placed there at the specified angle.

General:

General:

General:

The reinforcement is placed along the entered placing line, but at the height of (i.e. aligned with) the definition bar.

This is only available when the Reinforce with 3D model option is active. Otherwise the spatial reference is missing.

The reinforcement is placed along the entered placing line directly at their height. (This line does not have to be parallel).

• Reinforce with 3D model is not active:
  The reinforcement is placed at right angles to the placing line within the placing region.
• Reinforce with 3D model is active:
  The basic orientation in three-dimensional space is retained. If a shell entity exists (see method 1), the definition bar is moved automatically – based on the spatial reference to the placement.

The reinforcement is placed where the points of the placing line were defined. (This line does not have to be parallel).

The reinforcement can be rotated within the placing region. The definition of the angle of rotation, however, is different.

• Reinforce with 3D model is not active:
  An angle of rotation of 0 causes the reinforcement to be placed at right angles to the placing line.
• Reinforce with 3D model is not active:
  An angle of rotation of 0 degrees causes the reinforcement to be placed in such a manner that it is projected on the placing view using the three-dimensional orientation.

   

Application:

Application:

Application:

Align is the standard setting when the 3D model option is active.

Move is the standard setting when the 3D model option is not active.

It can be used for placing an existing bar elsewhere, regardless of whether or not the 3D model option is active.

Rotate is suitable for all placements that are not at right angles to the placing line.