Double Quarter Turn

Stairs module

You can use the Double Quarter Turn Stair tool to draw double quarter-turn stairs.

To create a double quarter-turn stair

1. Click Double Quarter Turn Stair (How).
   

   Activate Double Quarter-Turn Stair in one of the following ways

   • Menu bar: Create Architecture Stairs

   • Palette: Tools Create area in the following module(s):

   Stairs

   • Configuration: Architecture Stairs flyout
2. Place eight points to define the outline of the stair (the first and last point define the bottom of the stair). You can define any outline you want.
   Use the tools in the dialog line and on the shortcut menu.
   

   When you draw lines and polylines, the following additional drawing aids are provided in the dialog line:
   

   Icon	Function	Use
   	No icon pressed in	The lines can be drawn at any angle. This is the default setting.
   	Enter at right angles	The line can only be drawn at right angles to the current system angle.
   	Cursor snap	The line can only be drawn at specific angles.
   15.00	Cursor snap angle	Define the cursor snap angle here (only possible when is enabled).

   

   (A) Bottom
   (B) Top
   (C) 1. stringer
   (D) 2. stringer

3. To reposition the line of travel, click RefStr and select the reference stringer for the inner, center or outer line of travel. If you set this to Inner or Outer, you can use the Offset parameter to set a distance between the line of travel and the stringer.
4. Click Height to set up the height of the stair.
5. Click Match to copy the component settings from an existing stair.
6. Right-click in the workspace or click OK on the Context toolbar to confirm the current settings.
7. Define the geometry of the stair (rise, tread, etc..).
8. Click and define the individual stair components.
   Click OK to confirm the settings.
9. Click Close to finish designing the stair and acknowledge the prompt by clicking Yes.

   The stair is saved and this completes the design.

10. Place the stair’s label .

Examples