The drawing is distorted
Errors and error messages while transferring DXF/DWG files
Problem:
- The drawing is completely distorted.
- New dimension lines have incorrect dimensioning information.
- The DXF log contains the message:
- Dimension texts differ: DXF -> Allplan 0.04 -> 4.00 or different dimension text: DXF -> Allplan 0.10 -> 2.54
- The pens for the drawing are much too thick.
- When the drawing is printed, it is too small or too big.
Cause:
When you imported the file, you set the wrong factor. (Resizing factor in the Options)
Solution:
- Import the file using a factor of 1.
- Measure something whose length you know (for instance, a door opening or the thickness of a wall).
- Based on the value returned by the program, work out the correct factor and import the file again.
Example:
Measured door opening yields:
0.76 m
|
-> factor = 1 => mm
|
0.076 m
|
-> factor = 10 => cm
|
0.00076
|
-> factor = 1000 => m
|
0.0299 m
|
-> factor = 25.4 => inch
|