Specifying bend and crank dimensions

Tool(s): Bar Shape + Mesh Shape

The exact bend and crank dimensions are not defined until the outline has been entered in its entirety and, if necessary, the view has been specified.

To define bend and crank dimensions

1. Click and to select the relevant segment number for Segment.

   The selected segment type is displayed for information in the line below.

2. Click beside Bending angle or Crank value.
3. Enter the desired values for the bend or crank and click OK to confirm.

   Note: You can also enter values for the bending angle and crank directly in the Bar Shape or Mesh Shape palette.