Define, modify reveal, parameters

Tool(s): Define, Modify Reveal

You can set the following parameters on the Define, Modify Reveal Context toolbar:

• Revl OOuter depth of reveal
  

  With this parameter you define the depth of the reveal which is calculated based on the exterior side of the opening.

  Note: The exterior side of the opening is the data entry side.

  

  Note: You can either enter the inner or the outer depth of the reveal.

• Revl I Inner depth of reveal
  

  With this parameter you define the depth of the reveal which is calculated based on the interior side of the opening.

  Note: The interior side of the opening is the side opposite the data entry side.

  

  Note: You can either enter the inner or the outer depth of the reveal.

• Depth Depth of smart symbol
  

  With this parameter you define the depth of the aperture element.